Enable/Disable Device Driver Signing in Windows 10

Enable/Disable Device Driver Signing in Windows 10

I experienced a problem installing old hardware in Microsoft Windows 10 where I couldn’t find compatible drivers for a network card. I came across some community drivers on a website, but when I tried to install them, I received an error.

Windows encountered a problem installing the driver software for your device.
Windows found driver software for your device but encoutered an error while attempting to install it.
The hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering.

To solve this problem, I had to disable Device Driver Signing. Here’s how it’s done in Windows 10.

Option 1 – Command to Enable or Disable

1. Click the “Start” button.
2. Type “command“.
3. Right-click on “Command Prompt” and select “Run As Administrator“.
4. Do one of the following:
   • To disable device driver signing, type “BCDEDIT /set nointegritychecks ON” then press “Enter“
   • To enable device driver signing, type “BCDEDIT /set nointegritychecks OFF” then press “Enter“

You’re done! The Device Driver setting is now modified.

Option 2 – Disable From Menus

I figured this was security that was built into Windows to prevent me from installing bad drivers. This is a feature called Device Driver Signing. After going through the steps to disable driver signing in Windows 8, I was able to get my community drivers installed. Here’s how I did it.

1. Select the “Start” button.
2. Type “startup”.
3. Select “Change advanced startup settings“.
4. Select “Restart now” under the “Advanced startup” area.
5. Select “Troubleshoot“.
6. Select “Advanced Options“.
7. Select “Startup Options“.
8. Select “Restart“.
9. A menu will appear where you can press “7” on your keyboard to choose “Disable driver signing enforcement“.

Now Device Driver Signing should be disabled, allowing you to install any driver you like in Windows 10 until you reboot.

Thanks for Reading...

Masud Rana

,,